OPERATING INSTRUCTIONS
+$00(5'5,//
3.
4"'&5:*/4536$5*0/4
Before drilling into walls make sure that you are not breaking into an electricity, gas or water
supply line. Use a suitable detector.
Always unplug the drill before changing a drill or bit.
The chuck key should always be stored in the key holder.
To avoid injuries, securely attach the work piece with a vice or clamp.
When drilling or driving a screw: Do not allow the motor to stall under the load.
In the event of an electrical or mechanical malfunction, immediately switch the drill off and
disconnect the plug.
WARNING! While impact drilling, wear suitable ear protective equipment. Exposure to the
excess noise levels can cause hearing loss.
WARNING! Use auxiliary handles supplied with the tool. Loss of control can cause a
serious personal injury.
EN 1 6DIHW\LQVWUXFWLRQV
To Next Page
Loading...