1.4 Function DESC
Handlebar
Battery
ChargingPort
(Insert the Fiido charger ONLY.)
(The right side is rear brake.)
Rear Brake
(Pull the handle outward to shift up.)
7 Speed Shirft Up
(Click the button to shift up.)
7 Speed Shift Down
(Display the current derailleur gear.)
Speed Gear Display
5
Power Assisted Level Switch
(① Single click to switch down the
assist level.
② Double-click to switch kmh/mph
display.
③ Long press for 3
seconds,when the speed
displayenters the flashing state,thecruise
contro lfunctioncan be started/turned off.）
(In case of overtaking,road section affecting
safety visibility or emergency, slow down
and ring the bell for signal.)
Horn
(①Single click to switch up the assist level.
②Double click to turn on/off the headlight.
③Press three times: Activate the boost
function; pressing the brakewill exit this
function.)
Headlight/Gear Switch
(①Click to switch the display of the data.
②Long press for more than 3 sec：turn on/off the power.)
Power-on Button
(Displays current speed.)
( To connect the Fiido Mate cycling watch,
please press the button "∧" and"V" at the
same time and hold for 3 seconds. The
Bluetooth connection icon will blink
during the connection process. Once
connected, the icon will remain solid.)
(Keep the throttle steady for around 8 seconds to turn on cruise
control,and the icon will light up.Brake or change the throttle
to turn off cruise control, and the icon will go off.)
(Display the current
power assisted gear.)
Fiido Watch Connection Indicator
Cruise Control Indicator
Speed
Power Assisted Level Display
(Displays battery level.)
(When the bike connects with the phone successfully, the
Bluetooth icon will be shown.)
Battery Status
APP Connection Indicator
(When the boost function is activated by
pressing the “ ” button three times,
this icon will be displayed. The icon
will turn off when the brakes are applied.）
Boost Icon
To Next Page
Loading...
