2. EQ parameter setting instructions
This area is the main parameter section for EQ adjustment. There are a total of 31 levels of EQ
parameters available for adjustment. You can change the parameters through interface buttons, push
buttons, arrows, etc. to adjust the parameter configuration that meets your own requirements. Each
section can set the PEQ type, gain value, frequency value, and Q value parameters.
2.1 PEQ type
PEQ is mainly divided into 3 types:
Type 1: PEQ - Peak EQ. In this mode, frequency point adjustment will only affect the frequency
amplitude at the current frequency point and its sides, as shown in the figure above.
To Next Page
Loading...