Select 4.4Output mode
BAL.PO and BAL.LO available
SPDIF out
(it only needs to be set in this way when the coaxial output is used)
D2P mode: when playing PCM signals, it will output raw PCM signals; when
playing DSD signals, it will first convert DSD to PCM and output PCM signals.
DoP mode: PCM will be output as PCM signals while DSD will be output as
raw DSD signals.
Notes:
Select DoP first. For some devices that are not supportive of DoP, please
select D2P.
Gain
There are 4 levels, Over-ear headphone mode, High, Medium and Low,
corresponding to 4 levels of output voltages. You can select different Gains
according to the earphones used.
To Next Page
Loading...
