Fiio X1 Quick Start Guide

X1 Portable High Resolution Lossless DAP / Music Player
Quick Start Guide
Before Using for the First Time
A. Charge the X1
1. Charges to full in ~3 hours using DC 5V/2A adapter (recommended)
2. Charges to full in over 5 hours using computer USB port (not recommended)
B. TF / Micro SD card
1. Recommended brands: Genuine Sandisk, Transcend, Kingston—Class 6 or above
2. Maximum supported size: 128G
3. Recommend formatting card to FAT32 format or inserting card into X1 for
formatting
4. Inserting / removing TF / Micro SD card
i) Open rubber flap to reveal TF / micro SD card slot
ii) Insert card into slot and press into slot to install card
iii) Press card into slot again to eject card
Slot

Fiio X1 Specifications

General

Type	MP3 player
Equalizer	Yes
Impedance	100 Ω
Frequency range	20 - 20000 Hz
WMA sample rates	- kHz
Built-in speaker(s)	No
Equalizer bands quantity	7
Signal-to-Noise Ratio (SNR)	110 dB
Total Harmonic Distortion (THD)	0.003 %
Product color	Blue
LED indicators	Charging, Operation
Volume control	Digital
Housing material	Aluminum
Battery voltage	3.7 V
Battery capacity	1700 mAh
Continuous audio playback time	12 h
Cable length	1 m
Charging time	4 h
Touchscreen	-
Pixel density	- ppi
Display diagonal	2 \
Display resolution	320 x 240 pixels
Cables included	USB
Headphone connectivity	3.5 mm
Interface	3.5mm
USB connector type	Micro-USB
Audio formats supported	AAC, ALAC, APE, FLAC, WAV, WMA
Player media type	Flash memory
Video memory capacity	- h
Total storage capacity	- GB
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	128 GB
Package width	130 mm
Package height	25 mm

Weight and Dimensions

Depth	57.7 mm
Width	102 mm
Height	14.1 mm
Weight	96.7 g