Fillikid 18003 - Adjusting the Backsystem; Try carrier on without child; Release velcro and reposition straps; Fasten and tighten hip belt

18003
Rückensystem anpassen
Probieren Sie die Rücken-
trage ohne Kind an. Schät-
zen Sie die erforderliche
Rückenlänge.
Zum Anpassen den Klett-
verschluss lösen und die
Schultergurte neu positio-
nieren.
Trage anlegen und dann
den Hüftgurt schließen und
anziehen. Der Hüftgurt ist
korrekt angelegt, wenn er
bequem auf dem Hüftkno-
chen sitzt.
1 2 3
Adjust the backsystem
Try the carrier on without the child. Estimate the required back lenght.
To adjust, release the velcro tab and reposition the shoulder straps.
Put the carrier on, then fasten and tighten the hip belt. When tted correctly, the hip belt
should „sit“ comfortably on the hip bone.
Tighten the shoulder straps. When tted correctly, the shoulder straps should be in contact
with the torso from the shoulder blade on the back to the underarm on the front.
Remove the carrier and adjust the backsystem if necessary, repeating steps 2 to 4 until
described t is achieved.
Move the top stabiliser strap adjuster so that it is positioned on top of the shoulder. Then
tighten both top stabiliser straps.
Fasten the chest strap and position 4cm below the protruding points of the collor bone;
adjust if necessary using the slicers.
1
2
3
4
5
6
EN
DE
18003/18004