Fillikid GesmbH | Tiefentalweg 1, A-5303 Thalgau, Austria | fillikid.at
MADE IN CHINA
Fillikid GesmbH | Tiefentalweg 1, A-5303 Thalgau, Austria | fillikid.at
MADE IN CHINA
EN
ASSEMBLY INSTRUCTIONS FOR THE LYING AREA
1. Take the Zipper to the hand.
2. Snap the zipper into place (see picture 1,2)
3. Close the entire zipper around the travel cot. (see picture 3,4)
4. Now secure the cover to the Velcro fastener. (see picture 5)
5. Then take two metal bars with different ends and put them in the pockets provided
and in each other. (see picture 6,7,8)
6. Finally lay the mattress on the lying surface. (see picture 9,10)
picture 1 picture 2
picture 6
picture 8
picture 7
picture 9 picture 10
picture 3
picture 5
picture 4
EN
To Next Page
Loading...
