FIMAK SPM 100M - Electrical Components List

FiMAK
MOBİL KAZANLI SPİRAL MİKSER 100M-160M-200M -250M
85
5. ELECTRICAL COMPONENTS LIST
Problem
Possible Causes
Solution
Spiral loses speed
Upper belt looseness
Check the belt tension.
Bowl loses speed
Bowl belt looseness
Check the belt tension.
Main control switch is on, but the
machine does not work
Bowl cover is open
Or
Switch does not work
Close the bowl cover. Check the
Switch.
There is no activity on the control
panel
One or more fuse is burned
down
Thermal circuit breaker has
been armed to protect the
system
Check the electrical fuses. Find
the problem that caused burning
down.
Set thermal switches to the first
position. Find the cause come
into action.
The timers do not work during the
mixing time
The indicator is at the
manual position
Timers position is on “0”
Timers not working
Set it to automatic position.
Activate the timers.
Replace the timers.
Bowl rotates unbalanced
There is a problem with
fixing plates
Lubricate the grease nipple at the
center of the plate. Check the
tension of screws on the plate.
When the head closing
button is pressed, the
machine does not start.
The bowl guard is raised.
The trolley is not
completely inserted and
therefore the feeler does
not trigger the sensor.
The sensors do not work.
Lower the bowl guard.
Check if the trolley inserted
correctly and completely.
Replace the SE 1 sensor
Electrical Components List