FIMAK SPM-40 - Genel Bilgiler; İşletme; Carriage of the Machine

FİMAK
DD.009 / Rev. No 00 SPİRAL MİKSER MAKİNASI
Tarih 10.10.2012 Sayfa 6 / 92
CONTENTS
1. GENERAL INFORMATION
2. OPERATION
2.1
Carriage of the Machine ............................................................................................................
64
2.2
Installation of the Machine ........................................................................................................
65
2.3
Kneading Process .............................................................................................................................
66
2.4
Points To Be Aware of When Using The Machine ............................................................................
66
3. LIST OF MATERIALS
3.1
Lists of Components .........................................................................................................................
67
3.1.1
The Main Body Components List (spm-40) ......................................................................................
67
3.1.2
The Main Body Components List (spm-100-spm-200) .....................................................................
68
3.1.3
The Main Body Components List (spm-250) ....................................................................................
69
3.1.4
The Bowl Set Components List .........................................................................................................
70
3.1.5
The Mixing Set Components List (spm-40) .......................................................................................
71
3.1.6
The Mixing Set Components (spm-100-spm-200) ............................................................................
72
3.1.7
The Mixing Set Components (spm-250) ...........................................................................................
73
3.1.8
The Bowl Rotating Set Components List (spm-40) ...........................................................................
74
3.1.9
The Bowl Rotating Set Components List (spm-100-spm-200-spm-250) ..........................................
75
4. MAINTENANCE AND SAFETY INSTRUCTIONS
4.1
Periodic Lubrication ..........................................................................................................................
76
4.2
Belt Tightening ..................................................................................................................................
77
4.2.1
How to check belt tension? .............................................................................................................
78
4.3
Pulley Removal Scheme ....................................................................................................................
78
4.4
Removal Of The Belts ........................................................................................................................
79
4.5
Safety Instructions ............................................................................................................................
80
4.6
Control Panels (spm40-spm80-spm100-spm130-spm160- spm200) ...............................................
81
4.6
Control Panels (spm-250) .................................................................................................................
82
4.7
Main Power Switch ...........................................................................................................................
83
4.8
Needs To Be Done To Ensure Longer Lifetime .................................................................................
83
4.9
Operating ..........................................................................................................................................
84
1.1
Manufacturer Company Information ........................................................................................
59
1.2
Product Information ..................................................................................................................
59
1.3
Certificates .................................................................................................................................
60
1.4
General View ..............................................................................................................................
62
1.5
Introduction ...............................................................................................................................
62
1.6
The Operating Principle .............................................................................................................
63
1.7
Technical Specifications .............................................................................................................
63