FIMAK SPM-40 - Kumanda Panelleri; SPM40-SPM80-SPM100-SPM130-SPM160-SPM200

FİMAK
DD.009 / Rev. No 00 SPİRAL MİKSER MAKİNASI
Tarih 10.10.2012 Sayfa 81 / 92
4.6 COMMAND PANELS
• SPM40–SPM80-SPM100-SPM130-SPM160-SPM200
NO:
BUTTON
FUNCTION
1
TIMER I
It is used to set the time of slow speed operating.
2
BOWL DIRECTION
It is used to set the rotation of bowl.
3
ROTATE
It is used only to rotate the bowl, while the machine is not
operating.
4
AUTO / MAN.
It is used to choose automatic or manual operating.
5
TIMER II
It is used to set the time of high speed operating.
6
SPEED I
It is used to start slow speed operating.
7
EMERGENCY
It is used to stop the machine in case of emergency.
8
SPEED II
It is used to start high speed operating.
1
6
7
5
3
2
8
4
Instructions for Use