DD.009 / Rev. No 00 SPİRAL MİKSER MAKİNASI
Tarih 10.10.2012 Sayfa 83 / 92
4.7 MAIN POWER SWITCH
4.8 NEEDS TO BE DONE TO ENSURE LONGER LIFETIME
• After each work, clean the bowl, spiral hook and blade. Do not use scrapers made of metal.
• Clean the machine's exterior surfaces with a damp cloth.
• Lubricate upper and lower bearings regularly.
• In case of wear, replace the bowl balance rollers with new ones.
• Check the belt and pulley system regularly and renew the old belts.
Before operating, set the main control switch on position 1.
Switch to position 0 after use and make the necessary
cleaning.
To Next Page
Loading...
