FIMAK SPM-40 - Page 85

FİMAK
DD.009 / Rev. No 00 SPİRAL MİKSER MAKİNASI
Tarih 10.10.2012 Sayfa 85 / 92
4.10 MAINTENANCE CHART
4.11 TROUBLESHOOTING
Problem
Possible Causes
Solution
Spiral loses speed
Upper belt looseness
Check the belt tension.
Bowl loses speed
Bowl belt looseness
Check the belt tension.
Main control switch is on, but the
machine does not work
Bowl cover is open
Or
Switch does not work
Close the bowl cover. Check the
Switch.
There is no activity on the control
panel
One or more fuse is burned
down
Thermal circuit breaker has
been armed to protect the
system
Check the electrical fuses. Find
the problem that caused burning
down.
Set thermal switches to the first
position. Find the cause come
into action.
The timers do not work during the
mixing time
The indicator is at the
manual position
Timers position is on “0”
Timers not working
Set it to automatic position.
Activate the timers.
Replace the timers.
Bowl rotates unbalanced
There is a problem with
fixing plates
Lubricate the grease nipple at the
center of the plate. Check the
tension of screws on the plate.
AUTOMATIC SPIRAL MIXER PERIODIC MAINTENANCE CHART
General Maintenance
Daily
Weekly
Monthly
Description
Cleaning of electrical parts and
engine
✓
Clean with a vacuum
cleaner.
External cleaning
✓
Wipe with a damp cloth and
dry.
Cleaning Chute
✓
Do not use scrapers made
of metal.
Lubricant
✓
Make the necessary
lubrication regularly.
Belt Tension Control
✓
Check the tension regularly
and keep the standard
tension (0, 5 cm).
Maintenance Chart