Need help?Do you have a question about the Final brainLight UX3000 and is the answer not in the manual?
General| Driver Type | Dynamic |
|---|---|
| Driver Size | 40 mm |
| Frequency Response | 20 Hz - 20 kHz |
| Cable Length | 1.2 m |
| Connector | 3.5mm |
Procedure to turn the headphones on and status indicators.
Procedure to turn the headphones off and status indicators.
Steps to activate Active Noise Cancelling and status indicators.
Steps to deactivate Active Noise Cancelling and status indicators.
Steps for initial pairing with a device via Bluetooth.
Procedure to unpair the current device and pair with a new one.
Steps to reset the headphones to factory default settings.
Instructions for playing, pausing, and skipping tracks.
Handling incoming and outgoing calls.
Activating voice assistants.
Common causes and remedies for headphones failing to power on.
Solutions for issues preventing the headphones from powering off.
Troubleshooting for slow charging or no charging.
Resolving issues with headphones not being detected or paired.
Causes and solutions for intermittent audio playback.
Troubleshooting when the microphone is not functioning.
To Next Page
