1
BLUETOOTH® SWIM HEADPHONES
QUICKSTART GUIDE
HI THERE!
Let’s get started by registering your device at www.FINISswim.com/registration/index.ssp.
When registration is complete you will be enrolled in the warranty and replacement program.
Proof of purchase is required.
Visit www.FINISswim.com/Amnis-Stream for more information.
WHAT YOU NEED
WHAT YOU HAVE
FINIS Amnis Stream
Bluetooth® Swim Headphones
2X Goggle Clips Mesh Carrying Bag
Apple Watch Clip
Series 3 & 4
Garmin Watch Clip
Fenix 5 Plus Series
Left Headphone
(No buttons)
USB Charger Solid RED Light
Garmin Watch Clip
Vivoactive 3 Music
Forerunner 645 Music
USB Charger
GET TO KNOW YOUR BUTTONS AND LIGHTS1
2
TIME TO CHARGE!4
3
You will need a smartwatch that fits these simple guidelines:
For an updated list of available clips & compatible watches,
visit www.FINISswim.com/Amnis-Stream
Charge Fully Before Your First Swim.
1. Make sure Amnis Stream is completely dry.
2. Plug in the USB Charger.
3. Remove the Goggle Clip from the Left Headphone
(the one without the buttons) and slide it into the charger
(logo side down).
• Amnis Stream’s Light Solid RED = Amnis Stream is
now charging
4. Amnis Stream is fully charged when: Amnis Stream’s
Light turns off.
• Battery lasts up to 5 hours, depending on the watch and
Amnis Stream volume level
1. Multi-Use Button
Power On: Press and hold Verbal Cue “POWER ON”
Power Off: Press and hold Verbal Cue “POWER OFF”
Play/Pause: Single Press
3. LED Light
BLUE Light flashes rapidly Amnis Stream is on and
trying to Bluetooth® Pair
Solid BLUE Light Amnis Stream is connected to
your smartwatch
BLUE Light flashes slowly Audio is working
RED Light Low Battery
2. Volume and Track Change
Volume Up:
Single press the Top Button (+)
Volume Down:
Single press the Bottom Button (-)
Track Change:
Press and hold the Top Button (+)
Waterproof and Swimproof
Offline audio capabilities
Bluetooth® connectivity
1
2
3
To Next Page
Need help?
General
