Fintek KYOTO - Page 38

Press the ON/OFF button " " , switch on the
air conditioner, it will run by memory mode.
Press the MODE button " " set up the
mode to fan " ", the air conditioner will
run in fan.
Press UP " " or DOWN " " button, to
adjust the setting up temperature.
Press the FAN SPEED button " " , set up
the fan speed. is low speed, is middle
speed, is high speed, ( flashing) is auto
speed.
Fan auto fan, the speed is choosen by the
difference of room temp
erature and setting
temperature.
Room temperature- setting temperature＞5℃,
high speed.
Room temperature- setting temperature＞3℃,
middle speed.
Room temperature- setting temperature＞1℃,
low speed.
Press the ON/OFF button " " , switch off
the air conditioner. Next time when this
button is pressed, the air conditioner will
operates in this mode by memory.
3. 6 FAN MODE
3. 5 DRY MODE
13
38 KYOTO