EasyManua.ls Logo

Fintek KYOTO - PROBLEM SOLVING

Default Icon
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3. 15 PROBLEM SOLVING
PROBLEM POSSIBLE CAUSES
POSSIBLE SOLUTIONS
-The air conditioner does not work.
1.Wrong setting of the timer/Check it.
-The air conditioner does not refrigerate the
room.
2.Problems on the power supply/Call the
service center.
-Strange smell in the room.Water drips from
the air conditioner.
3.The filter could be dirty/Clean it.
4.The room temperature is too high/Wait
until the temperatur
e goes down.
5.The temperature is not properly set/Check
it.
6.The grids could be obstructed/ Check and
remove the eventual obstacles.
-Dampness in the room, coming from walls,
carpets, furnishing or similar.
-Wrong installation of the air conditioner.
-Wrong connection of the drainage pipe.
-Exhausted batteries.
-Wrong insertion of the batteries inside the
remote control.
-Protection of the conditioner.Wait for 3 min
and the air conditioner will start to work again.
If the supply cord damaged, it must be
replaced by manufacturer or its service agent
or a similarly qualified person in order to
avoid a hazard.
-The remote control does not work.
-The air conditioner does not work for 3 min
when switched on.
The max operation temperature for the air
conditioner: (max cooling: outdoor DB43/
WB26,indoor DB32/WB23; mi
n heating:
outdoor DB-5/WB-6℃,indoor Db20)
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
Children should be supervised to ensure
that they do not play with the app
liance.
19
44 KYOTO

Related product manuals