that the WiFi contact is poor. You can disassemble the machine
and unplug the wires on the WiFi network card.
Q5: How to change the operating system?
A5: First insert the U disk, press the "Delete" key to enter BlOS,
then select "startup", then select "boot", and then press the
"Enter" key to enter the system priority boot menu, set the U
disk as the priority boot, and then enter and save. (Note: We
only provide maintenance for pre-installed systems.)
Q6: Why can't the USB port be used?
A6: If the USB port cannot be used after the computer is turned
on and enters the desktop, you can try to shut down the
computer first. After shutting down, press and hold the power
button for 30 seconds, repeat 3 times to discharge static
electricity, and then wait for five minutes before turning on the
computer. If the USB port still cannot be used normally after
turning on the computer, please contact the FIREBAT team.
Q7: Why is it always stuck in the "Windows Preparing
Automatic Repair" state?
A7: This problem is mostly caused by problems inside the
To Next Page
Loading...