Firefly 2 - Heating Control: From Device

14
FIREFLY APP
Press and hold the right button.
Tap the left button 3 times quickly, just like checking the
temperature (while still holding the right button).
This puts the Firefly 2 into "temperature setting" mode.
The LED blinks red 1 to 7 times, to indicate what the current
set temperature is.
Tap the left button again (while still holding the right button)
now sets the temperature to:
Release the right button to exit temperature setting
mode and save the last set temperature.
HEATING CONTROL : FROM DEVICE
7 TAPS (CONCENTRATES)
6 TAPS (HIGH)
5 TAPS (MED HIGH)
4 TAPS (MED)
3 TAPS (MED LOW)
2 TAPS (LOW)
1 TAP (ULTRA LOW)
500
420
400
380
360
340
320
IMPORTANT: Concentrates setting will cause
combustion if used with loose-leaf material!!