p12 GottaGo User Manual
The GottaGo is designed only to be
used on level ground.
To unfold the frame, identify the
buttons
A
on the underside of the
frame.
For ease of assembly hold the GottaGo
frame the right side up (where the legs
are folded underneath) and push in the
buttons from behind
A
simultaneously
to release the legs.
A
When unfolding the legs, ensure the
feet are resting on the ground as
opposed to up in the air.
Unfold the legs until an audible click is
heard.
Check that all four leg are fully apart
and locked in position.
Set the GottaGo frame on level ground.
11.2 Adjusting the GottaGo frame height
The GottaGo has 3 height adjustment settings; Potty height
1
, standard height
2
and disabled toilet height
3
.
1
2
3
Potty height
Standard height
Disabled toilet height
To Next Page
Loading...