p18 GottaGo User Manual
Secured with hoop at
the top
Attaching the hooking
lock into the receiver
Inserting Hooking Lock
Insert the hooking lock
C
by pushing it into the receiver
D
at the rear of the
footplate. To do this, ensure that the hook is the correct way up, with the hook at
the top
E
.
Once you have attached the footplate in the desired position, the footplate can
remain in place, even when folded.
If the height of the footplate needs to be readjusted at a later point, remove the
hooking lock and footplate, and reattach following the steps above.
Hooking
lock
To Next Page
Loading...