The Perfect Sleep Chair is a lift chair designed to enhance comfort and provide assistance with sitting and standing. It is equipped with various features for reclining, lifting, and massage, making it suitable for indoor residential use.
Function Description:
The primary function of the Perfect Sleep Chair is to provide a comfortable seating experience and assist users in transitioning between sitting, reclining, and standing positions. It features a motorized lift mechanism that gently raises the chair, allowing the user to stand up with ease. Conversely, it can recline the back and raise the footrest for relaxation. The chair also incorporates heat and massage functions for added comfort and therapeutic benefits.
Important Technical Specifications:
- Weight Capacity: All lift chairs are rated for a maximum weight capacity of 350 pounds. Users must adhere to this limit to prevent damage or injury.
- Duty Cycle for Motors: The lift chair motors have an intended maximum duty cycle of 2 minutes on and 18 minutes off. Excessive use beyond this can lead to product damage or premature failure.
- Temperature Range for Storage/Transportation: The product can be stored or transported within a temperature range of -40°F to 149°F.
- Battery Backup: The chair is equipped with a dual 9V battery backup feature (batteries not included) that allows it to return to a normal seated position once during a power outage. Heavy-duty or industrial-strength 9V batteries are recommended and should be replaced after any power outage or every 3-6 months to ensure sufficient charge.
- EMI/RFI Interference: Electronic devices in the chair can be affected by Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) from sources like cell phones, mobile radios, and microwaves. Maintaining at least 9 feet between the chair and such sources can reduce interference.
- Flammability Standards: The upholstery materials meet the flammability requirements of California Bureau of Electronic and Appliance Repair, Home Furnishings, and Thermal Insulations Technical Bulletin 117-2013. The product contains no added flame retardant chemicals.
- Formaldehyde Compliance: The product is TSCA Title VI Compliant and California 93120 Compliant for Formaldehyde produced with all ULEF-based products. A warning is provided regarding potential exposure to chemicals, including Formaldehyde, known to the State of California to cause cancer, birth defects, or other reproductive harm.
Usage Features:
- Hand Wand Operation: The chair is controlled via a hand wand with clearly labeled buttons for various functions:
- BACK (DOWN/UP): Reclines the back or returns it to the normal upright position.
- LIFT (DOWN/UP): Lowers the chair from a lifted position or lifts the chair and closes the back (if reclined). Holding the "DOWN" button in the LIFT section will also extend the leg-rest.
- FOOT (DOWN/UP): Closes the footrest or raises/extends the footrest.
- HEAT (High/Med/Low/OFF): Cycles through different heat intensity levels (High, Medium, Low) and turns off the heat function.
- BACK MASSAGE (Pulse/Steady): Cycles through massage modes for the back (Pulse, Steady).
- SEAT MASSAGE (Pulse/Steady): Cycles through massage modes for the seat (Pulse, Steady).
- INTENSITY (Low/Med/High/OFF): Cycles through massage intensity settings (Low, Medium, High) and turns off the massage function.
- OFF: Turns off both the heat and massage functions simultaneously.
- Assembly: The chair features a "Knock Down" (KD) back frame for easy assembly/disassembly. To attach the back, KD brackets on the back frame must be aligned with the mechanism and pressed down firmly until an audible "click" is heard, indicating proper locking. The back cover is then secured with Hook and Loop fasteners (Velcro). Visual inspection of KD brackets and locking tabs is recommended if difficulty is encountered during assembly.
- Placement: The chair should be placed on dry, level ground with ample room for operation. Leg levelers can be used to make small adjustments for stability.
- Power Connection: The transformer should be connected directly to a standard wall outlet; extension cords are not recommended. The transformer should be placed in an open, well-ventilated area to prevent damage or premature failure.
- Safety Precautions:
- Always read and follow all instructions, notes, and warnings in the manual.
- Keep clear of "pinch or crush" points (reclining and lift mechanisms) and ensure the path of motion is unobstructed.
- Keep loose wires, pets, children, and fabrics away from moving parts.
- If unintended motion occurs, discontinue use and contact customer service.
- Do not modify, add, or remove any parts or features of the product, as this can void the warranty and cause damage or injury.
- Only use original manufacturer parts for repairs or service.
- If a problem is discovered during setup, do not plug the product into the electrical outlet until the issue is resolved. Do not attempt electrical repairs yourself.
Maintenance Features:
- Routine Maintenance: Periodic checks on the fabric and electronics are recommended over the product's lifetime.
- Fabric Inspection: Regularly inspect the fabric for discoloration, pulls, tears, or gaps.
- Cleaning: Use the correct cleaning method by consulting the cleaning code for the specific product. If unsure, contact customer service. The product is intended for indoor use only and should be kept away from heat sources, direct sunlight, and moisture.
- Wiring and Connections: Routinely inspect all wiring and connections to ensure they are not damaged, pinched, or frayed. Ensure all connections are secure.
- Electronics Protection: Keep all electronic components (motors, hand wands, button controls, junction boxes, heating pads, and wires) free of moisture and away from extreme temperatures.
- Damage/Exposure: If any damage or exposure is discovered during maintenance, unplug the product and contact the authorized retailer.
The Perfect Sleep Chair comes with a limited lifetime warranty for the recliner mechanism, springs, and frame against manufacturing defects. Comfort coil seat cushions have a five-year warranty against loss of resiliency. Power motors have a three-year warranty against defects (serial number from the defective motor must be returned for credit). All other parts not specifically listed are covered by a one-year limited warranty against defective material or workmanship.
Warranty Limitations:
The warranty does not cover:
- Defects in upholstery fabrics (vinyl, leather, or fabric) against wearing, fading, pilling, stretching, dye lots, natural markings, or splitting.
- Conditions resulting from incorrect or inadequate maintenance, cleaning, or care.
- Conditions resulting from other than ordinary residential wear or use for which the product was not designed.
- Merchandise used as a floor sample, purchased "as is," second-hand, at a distress sale, going-out-of-business sale, or from a liquidator.
- Misuse, abuse, delivery, or transportation damage.
For service claims, customers should contact FirstSTREET Customer Service at 800-958-8324. FirstSTREET will supply parts under warranty or at cost as long as they are available. After one year from the purchase date, the consumer is responsible for labor, packaging, and shipping costs. The product is not a medical device and is solely intended to enhance comfort.
Need help?
General
To Next Page
