- 4 -
GENERAL DESCRIPTION
These dryers employ a patented pressurised
cabinet system. A fan draws air through the
air intake grille pressurising the cabinet. The
pressurised air passed through the clothes in
a revolving drum. Damp air passes out
through the lint filter, which traps excess lint,
then out via the exhaust duct at the rear of
the cabinet.
INSTALLATION
Four installation options make the dryer
versatile enough to suit most requirements.
1. Free Standing
The dryer stands on the floor and can
easily be moved into position.
2. Side by Side Match *
Electronic & Dualcare only
A plinth with adjustable feet makes the
dryer an attractive side by side match to
an existing washer. It will also minimise
the amount of bending required when
loading or unloading the dryer.
3. Inverted Wall Mounting* ALL
Models
A wall mounting kit and inverted panel
makes installing the dryer above a washer
or tub possible.
4. Upright Wall Mounting* ALL
Models
The wall mounting kit allows you to install
the dryer at any desired height minimising
the amount of bending and stretching.
* Kits for these options are available from
any F&P dealer along with instructions.
Kit Part Numbers
AD55 – 502074
ED55 – 502075
ED56 – 502076
To Next Page
Loading...
