18
If your dryer is not operating properly use the checklist below to find the possible solution.
Pressing POWER or setting the timer does not turn the machine on.
Is the electrical cord plugged in?
Is the power switched on at the wall?
Is the door securely closed?
Is the dial pushed in?
Could your household power supply be at fault? Try plugging in another electrical appliance.
Make sure the timer is not in the OFF position.
Clothes are still damp.
Try selecting a higher dryness level.
Very small loads in the AeroSense™ dryer may under-dry. Increase the load size.
Pressing START/PAUSE does not start the AeroSense™ dryer.
Try pressing START/PAUSE again.
Has the KEY LOCK been set?
Dryer is taking a long time to dry.
Is the lint filter clean?
Is the airflow system free from obstruction?
The AeroSense™ dryer keeps stopping and starting.
Has WRINKLE FREE been turned on?
The AeroSense™ dryer is beeping and the pattern of lights is unfamiliar.
Turn the dryer off at the wall. Wait 15 seconds and turn it back on. Press POWER and restart dryer.
If the problem persists contact your Dealer or a Fisher & Paykel Authorised Repairer (refer to
page 20).
Operating problems
To Next Page
Loading...
