15
Getting started quickly
Easy touch buttons and LCD screen
These buttons require only a gentle touch to activate.
1
Touch POWER to activate your AquaSmart™ washer.
2
HIGH EFFICIENCY – this light tells you when ‘High Efficiency’ mode is recommended, and the
button allows you to switch between High Efficiency and Conventional modes (refer to
page 17).
3
The screen in the middle of the panel, will display the wash cycle options available (refer to
pages 21 – 27).
4
Use the SCROLL buttons to select the wash cycle that best suits your load (refer to page 21).
5
Use the SELECT/TICK button to confirm your selection. (For more information on how to alter
wash options refer to page 22).
6
Touch START – your AquaSmart™ will start to fill with water, and will automatically select the
correct water level and wash action for your load. To pause your AquaSmart™ at any time, simply
touch START/PAUSE.
3 4 5
EN
To Next Page
Loading...
