Internal Venting
Front venting is the only recommended option for venting into the
room. The dryer is set up for front venting when it leaves the factory.
Where possible all efforts should be made to
vent the dryer externally to avoid moisture
build up around the dryer.
External venting with kit part number
PD-F0408
Inverted wall mounting installation
Your dryer has been designed to be inverted and mounted on the wall above a washer or tub. A wall mounting kit must
be used. Inverting allows access to the dryer control panel.
Tools and Parts Required:
• Drill and 3mm bit
• Phillips head screwdriver
Wall Mounting Kit Includes:
• 2 x Plastic spacers
• 2 x Wall hanging brackets
• 2 x Hanging hook
• 4 x Wood screws
• 6 x Screws for hanging hooks and plastic spacers
https://producthelp.fisherpaykel.com/au/Dry/Dryers/Vented/DE4060M1/User_Guide_DE4060M1/03_Installation_Instructions
Updated: Sun, 27 Aug 2023 10:37:02 GMT
Powered by
5
To Next Page
Loading...
