Fisher & Paykel DishDrawer DD24D Series - Page 7

L(2,1) -2- 599618C DD24D install A2 USCA.indd 15/4/09 10:02:23 AM
PLUMBING AND DRAINAGE OPTIONS
DishDrawer ®with Waste Disposal (_;il}
If space is limited for fixing, push
hose through drain hose support
to required height
HIGHLOOP
min. 6"
(150 ram)
!
min. R8"
(200 mm)
Ensure hoses
Fit supplied
washer
DishDrawer ®using Air Break
with Drain Hose Joiner
Ensure hoses are routed
straight to joiner. Remove
excess hose material if
necessary.
37 3/8"(950 mm)
Max. height to
top of Air Break
_] (countertop or
wall mounted)
Fit supplied
washer
DishDrawer ® and Standpipe
O 1 1/2"(38 mm)
If space is limited for fixing, push
hose through drain hose support
to required height
(200 mm)
Fit supplied
washer
/
t