35
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSES WHAT TO DO
Unclean dishes Unsuitable
wash program for
load selected.
Select the appropriate wash program for the
load. Refer to 'Wash programs'.
Spray arm unable
to rotate.
Ensure no items are obstructing the spray arm
path. Make sure the spray arm is mounted
correctly and free to rotate.
Drawer incorrectly
loaded.
Refer to 'Loading suggestions'.
Filter plate or filter is
incorrectly inserted.
Refer to 'Maintenance'.
Filter plate or filter
is blocked.
Clean the filter plate and drain filter. Refer
to 'Maintenance'.
Detergent put in the
wrong compartment of
the dispenser.
Detergent must be placed in the large
compartment. Refer to 'Detergent'.
Incorrect detergent use. Refer to 'Detergent' and follow the detergent
manufacturer’s instructions.
Excess food
on dishware.
Scrape all food scraps prior to loading.
Spray arm holes
are blocked.
Clean the spray arm.
Spray arm
rotation blocked.
Remove any protrusions below the rack and
ensure the spray arm can rotate freely.
Hard water. Increase the rinse aid setting and the amount
of detergent used. Refer to 'Water hardness'.
Hard water Increase the rinse aid setting and the amount
of detergent. Refer to 'Water hardness'.
Water softener models: Increase the water
softener setting. Refer to 'Water softener'.
Non-water softener models: If living in an area
with very hard water, consult a plumber on
installing a household water softener.
To Next Page
Loading...
