Fisher & Paykel DishDrawer DD60S Series - ROUTE HOSES AND CONNECT; SECURE THE DISHWASHER; Drawer Removal and Product Mounting

ROUTE THE HOSES AND MOVE INTO THE CAVITY
6
7
REMOVE THE DRAWER AND SECURE THE PRODUCT
1
2
Tie together to avoid kinking.
A
The product has three pairs of
mounting brackets: a pair of
optional brackets on the top (C)
and two pairs of formed brackets
in the side of the chassis (A,B). Use
at least two out of the three pairs
to secure the product.
Ensure the sound insulation is
repositioned correctly.
B
2
30 mm
1
5
5
3
4
Ensure the drawer is removed and
then rotated anti-clockwise to
prevent kinked hoses
A
1
2
1
3
3
optional
(x2)
Ensure hoses and cord
are not kinked or twisted.
If top mounting brackets are
being used, ensure they’re
securely fitted before sliding
product into cavity
B
A
OR
optional
A
A
B
B
CC
max. 19 mm
(1,1) -2- 599683B DD60S installA2 NZGB.indd 6/7/09 11:36:30 AM
(1,1) -2- 599683B DD60S installA2 NZGB.indd 6/7/09 11:36:30 AM