EasyManua.ls Logo

Fisher & Paykel DishDrawer DS603 Series - The salt reservoir; Salt indicator light

Fisher & Paykel DishDrawer DS603 Series
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
Important!
The water softener must always be filled with granular salt made especially for dishwasher
water softening systems e.g. Somat salt. Do not use of cooking salt like table, rock, pellets or
salt for domestic water softeners as they may contain impurities that will impair or diminish the
life of the water softener.
The salt reservoir
Water softening can only take place when there
is salt in the reservoir. The salt reservoir must
be filled prior to using the DishDrawer® and
whenever the salt reservoir indicator light is red.
Salt indicator light
If the salt indicator light is red, the salt reservoir is
empty.
If the salt indicator light is black, there is enough salt in the
reservoir for the wash program that has been
selected.
Prefinished Models: The electronic display will
also indicate when the salt reservoir is empty by
displaying the salt
symbol.
Important!
Do not pour detergent or rinse agent into the
salt reservoir. Detergent and rinse agent will
destroy the water softener.
Salt Only
NO Rinse Agent
a
Salt Indicator Light
b
Salt Reservoir Cap
Salt reservoir
b
a
NO Detergent

Related product manuals