30
8.4 Removing the Outer Door Panel
8.5 Removing the Display Module
• Remove the 12 screws, 4 metal type down each side
of the door panel, and 4 plastic screws along the top.
• The outer panel will now pull forward to release.
(Take care as display harness is still attached).
• Disconnect the display harness by depressing the
connector lock and remove harness.
• The door outer is now free to remove.
Note: the 2 screws around the door latch do not
need to be removed.
• Remove the outer door panel as per section 8.4
• To remove the display module, unclip the lock
bracket from the panel by depressing the clips
and levering the bracket upwards to release.
8 SERVICING THE COMPONENTS
To Next Page
Loading...
