4
Door open (D)
595mm
Width (B)
600mm
Depth (C)
560mm
Height (A)
825-875mm
Electrical
A 3 Pin 10 Amp switched outlet is required. The switch must be located in a readily accessible
position with the product installed.
Joinery dimensions (DW820 & DW920)
Height A - 830mm MIN
Width B - 600mm
Depth C - 560mm
Door Open D - 595mm
Note
Ensure underside of bench is sealed with an oil based paint or moisture-proof polyurethane to
prevent possible steam damage.
Specifications
Product Size
Height 825-875mm
Width 595mm
Depth 555mm
Electrical 230-240 vAC
Drying Residual Heat / 1500 Watt Element
Water Pressure Minimum 30 kPa (4.3 psi)
Maximum 960 kPa (140 psi)
Water Temperature Cold water recommended.
Hot ideally 60-65°C (must not exceed 75°C)
Place Setting 12
INSTALLATION INSTRUCTIONS
To Next Page
Loading...
