CHANGING PRE-SET OPTIONS
18 2
WASH TEMPERATURES
RINSE OPTIONS
21
On the PRIDE models the warm temperature can be
adjusted if you think it is too hot or too cold.
(Note: On these models the hot temperature will be
the same as the hot water supply temperature).
On the EXCELLENCE models all wash temperatures can
be individually adjusted.
1. Select the WASH TEMPERATURE you want to adjust.
2. The wash progress lights show the temperature
adjustment possible for that temperature.
• Pressing the ADVANCE will cause the wash
progress light that is on to change.
• Advancing the Wash Progress light will increase
the wash temperature. If you keep pressing the
ADVANCE, the light will scroll back to the
coldest setting available for that wash
temperature.
On the Heavy Duty, Regular and Wool cycles you can
change the pre-set rinse option.
The pre-set rinse option on these cycles is a spray rinse
followed by a deep rinse. The spray rinse may be
replaced with a short spin or a deep rinse.
If you have a problem with impurities in your water
supply you may get a better wash if you change the
rinse option to 2 deep rinses. If you want to conserve
water change the rinse option to 1 deep rinse.
RINSE OPTIONS
MED spin Deep Deep
light on rinse rinse
SLOW spin Short Deep
light on spin rinse
HOLD Spray Deep
light on rinse rinse
To Next Page
Loading...
