Fisher & Paykel OB60 Series - Replacing the Power Supply Cable

10
230-240 V~ 3095-3370W
230-240 V~ 2350-2550W
E
N
L
1 (L )2
1 Unhook the terminal board cover by inserting a screwdriver into the two hooks “A” (Fig. 7).
2 Open the cable crimp by unscrewing screw “F” (Fig. 8), unscrew the terminal screws and remove
the cable.
3 Connect the new supply cable, of suitable type and section, to the terminal board following the
diagram in Fig. 6.
Replacing the power supply cable
230- 240 V 3 x 1.5 mm
2
A
F
Fig. 7 Fig. 8
Feeder cable section type HO5RR-F
Fig. 6
Single oven models