Fisher & Paykel OB76 Series - Cancelling the Self Clean Cycle

46
Using the Self Clean function
To start a Self Clean cycle
1a Remove oven shelves, side racks and all other accessories, bakeware, and utensils.
1b Wipe up any spills. Failure to do so may discolour the oven surfaces.
1c Check the inner glass pane of the oven door. If it has soiling on it (eg stains from greasy splatter),
you will need to clean it manually before starting a Self Clean cycle. For instructions, see ‘Care
and cleaning’.
Important!
If soiling is left on the glass, it will become burnt on during the Self Clean cycle, making it very difficult to
remove.
2a Close the oven door firmly.
2b Double oven models only:
Select either the UPPER or LOWER oven.
Important!
Ensure the function dial for the other oven is turned to ‘off’.