9
9
SECURE THE OVEN TO THE CABINETRY
1
Position the oven in the prepared cavity.
Important!
Do not lift the oven by the door handle.
2
Use the supplied screws and spacers to secure the oven to the cabinetry.
Double oven models only:
There are 4 screws and spacers provided (two per side).
Important!
Do not over-tighten the screws.
Take care not to damage the lower trim of the oven.
Do not seal the oven into the cabinetry with silicone or glue. This makes future
servicing difficult. Fisher & Paykel will not cover the costs of removing the oven,
or of damage caused by this removal.
8
CONNECT THE OVEN TO THE MAINS SUPPLY
Important!
This oven must be connected to the mains power supply only by a suitably qualified person.
This oven must be earthed.
Model code Max Power
(kW)
Hz Voltage (V)
OB76SD
4.25 50 Hz 220 - 240 V~
OB76DD
8.50 50 Hz 220 - 240 V~
We recommend that the power outlet is located in the right rear corner of the cabinet
cavity. This allows the power supply cable to sit inside the rear chamfered corner of
the oven and prevents it being jammed between the cabinet wall and rear of the oven.
Before connecting the oven to the mains power supply, check that:
the domestic wiring system is suitable for the power drawn by the oven
(as speci ed on the rating plate)
the voltage corresponds to the value given on the rating plate.
Note: For connection to the terminal block the maximum conductor size is 6 mm
2
.
Nameplate
Ensure supplied
spacer is fitted
between oven
and cabinetry
To Next Page
Loading...
