12
INSTALLATION GUIDE
Installing mounting plate in cabinet
1 Mark a centerline (A) along the base
of the cabinet.
2 Measure 357mm from the front edge
of the cabinet and mark a line (B)
across the centreline.
3 Measure 10mm along line (B) from
the centreline towards the left and
mark a screw hole (C).
4 Measure 36mm along line (B) from
the centreline towards the right and
mark a screw hole (D).
5 Place the mounting plate (E) aligning
its screw holes with the screw hole
locations on the cabinet base.
6 Fix the mounting plate with supplied
screws (F) to the screw holes.
Cabinet base
A
560mm
280mm
357mm
280mm
b c
d
E
Front edge
36mm
10mm
f
TOP VIEW
To Next Page
Loading...
