Fisher & Paykel OR90SCI6 - Operating Cooking Zones and Hot Surfaces

46
USING YOUR INDUCTION COOKTOP
To turn a cooking zone on:
When you have finished cooking: Control dials:
1 Place a suitable pan on
the cooking zone.
z
Make sure the bottom of the
pan and the surface of the
cooking zone are clean and dry.
IMPORTANT!
Always place small pans in the
centre of the cooking zone.
1 Turn the corresponding control
dial back to O (OFF).
Beware of hot surfaces
will show in the display of any cooking zones that are still too hot to touch. It will
disappear when the surface has cooled down to a safe temperature.
2 Turn the corresponding control dial
clockwise to the desired heat setting.
z
You can modify the heat setting at any
time during cooking.
4 3 2 1 0
9 8 7 2 1 0
1 0
OFF A
9 8 7
4 3 2 1 0
9 8 7 2 1 0
1 0
OFF A
9 8 7
1
2
3
4
5
6
7
8
9