80
ALERT CODES
ALERT CODE POSSIBLE CAUSES WHAT TO DO
A1
The oven has overheated. 1 Allow the oven to cool down.
2 Once the oven has cooled
down and the door has
unlocked, the alert code will
disappear. You can now use
the oven again.
A2
Door lock error: the door cannot be
locked after you have started
a Self Clean cycle.
1 Turn the power to the oven
off at the wall and on again.
2 Wait approximately 10
seconds. This is to allow the
door lock to return to its
initial position.
3 Set the clock. See ‘Setting
the clock and first use’
for instructions.
4 Try starting a Self Clean cycle
again, making sure that you
close the door firmly. See
‘Using the Self Clean function’.
A3
Door lock error: the door cannot
be unlocked after a Self Clean cycle
has finished.
1 Turn the power to the oven
off at the wall and on again.
2 Try touching on the oven
door to help the door
lock disengage.
3 If this doesn’t help and the
alert code reappears, call your
Fisher & Paykel trained and
supported service technician
or Customer Care.
F2
F + number
Technical fault. 1 Note down the alert code.
2 Wait until the cooling fans
have stopped and the oven
has completely cooled down.
3 Turn the power to the oven
off at the wall.
4 Call your Fisher & Paykel
trained and supported
service technician or
Customer Care with the
alert code information.
To Next Page
Loading...
