4
Safety and warnings
Electrical
The switch must always be accessible.
The power supply cable must not touch any hot
parts and must be positioned so that it does not
exceed 75
O
C at any point and cannot become
entrapped in the oven door.
To connect the cooker to the mains, do not use
adapters, reducers or branching devices as they
can cause overheating and burning.
This cooker must be connected to a suitable
double pole control unit adjacent to the cooker.
No diversity can be applied to this control unit.
The cooker must be earthed.
Gas
This cooker is supplied for use with natural gas
only, and cannot be used on any other gas
without modification. See ‘Gas installation’ for
modification to other gas types.
This cooker can only be installed in a room
with adequate ventilation. See the ‘Ventilation
requirements’ in the installation instructions .
To Next Page
Loading...
