To connect the power supply cable DO NOT unscrew the screws fixing the cover plate behind the
terminal block.
If the power supply cable is damaged, it must be replaced only by an authorised service
agent in order to avoid a hazard.
Voltage and power consumption
220-240/380-415 V 3N~ 50/60 Hz 48, 17 A (230 V) 11080W (diversity not applied)
https://producthelp.fisherpaykel.com/nz/Cook/Freestanding_Cookers/Induction/OR90SDBSIX2/User_Guide_OR90SDBSIX2/02_Installation_instructions
Updated: Fri, 08 Mar 2019 10:03:53 GMT
Powered by
10
To Next Page
Loading...
