Fig. 9 Incorrectly lifting the cooker.
Fig. 10 Incorrectly moving the cooker
Fixing the backguard
Before installing the cooker, assemble the backguard “C” .
• The backguard “C” can be found packed at the rear of the cooker.
1. Before assembling, remove any protective film/adhesive tape.
2. Remove the two spacers “A” and the screw “B” from the rear of the cooktop.
3. Assemble the backguard as shown and fix it by screwing the central screw “B” and the spacers “A”.
https://producthelp.fisherpaykel.com/nz/Cook/Freestanding_Cookers/Induction/OR90SDBSIX2/User_Guide_OR90SDBSIX2/02_Installation_instructions
Updated: Fri, 08 Mar 2019 10:03:53 GMT
Powered by
8
To Next Page
Loading...
