incorrectly may result in damage to the oven and may void
your warranty.
Your oven door has 3 panes of glass. The inner and middle panes may be removed for cleaning.
• Switch the oven off at the wall before removing the door.
• Take care, the oven door is heavy. If you have any doubts, do not attempt to remove the door.
Make sure the oven and all its parts have cooled down. Do not attempt to handle the parts of a
hot oven.
• Take extreme care when handling the glass panes. Avoid the edges of the glass bumping
against any surface. This may result in the glass shattering.
• Don’t use oven cleaners or any other harsh/abrasive cleaners, cloths, scouring pads, steel wool
or sharp metal scrapers to clean the glass surfaces. These scratch the glass and may damage
its special coating, which in turn could result in the glass cracking or shattering.
• If you notice any sign of damage on any of the glass panes (such as chipping or cracks), do not
use the oven. Call your Authorised Repairer or Customer Care.
• Make sure you replace all the glass panes correctly. Do not use the oven without all glass panes
correctly in place.
• If the glass panes feel difficult to remove or replace, do not force them.
• Call your Authorised Repairer or Customer Care for help. Note: service visits providing
assistance with using or maintaining the oven are not covered by your warranty.
Removing the door
1. Turn the oven off at the wall. Make sure you have prepared enough space for resting the door and its glass
panes on a clean, flat surface. Open the door to its full extent.
https://producthelp.fisherpaykel.com/nz/Cook/Freestanding_Cookers/Induction/OR90SDBSIX2/User_Guide_OR90SDBSIX2/1…
Updated: Fri, 21 Aug 2020 14:54:17 GMT
Powered by
10
To Next Page
Loading...
