Fisher & Paykel OR90SDBSIX2 - Storage Drawer; To remove the drawer

Remove the side racks first to make removing the sliding shelf supports easier.
Fig. 30a Fitting the sliding shelf supports
Fig. 30b Removing the sliding shelf supports
Storage Drawer
• The drawer opens like a normal drawer. The drawer slides stop if from sliding all the way out.
To remove the drawer
1. Open the drawer fully
2. Press the lever on the left guide rail down and the right guide rail up
https://producthelp.fisherpaykel.com/nz/Cook/Freestanding_Cookers/Induction/OR90SDBSIX2/User_Guide_OR90SDBSIX2/1…
Updated: Fri, 21 Aug 2020 14:54:17 GMT
Powered by
6