COFFEE MAKER INSTALLATION GUIDE | 19
8 CONNECT THE WARMING DRAWER TO THE MAINS SUPPLY
IMPORTANT!
●
All electrical work may only be carried out by suitably qualified and competent persons in accordance with national and local safety regulations.
●
This warming drawer must be grounded.
Before placing the coffee maker into the cavity, route the power cord into the back of the cavity and plug it in to the switched socket.
The switched socket should be in an easily accessible area within 35 7/16" (900mm) of the centre rear of the product.
Power requirements
Model Code Power Voltage Wattage Hz
EB24 11.25 A 120 V 1350 W 60 Hz
To Next Page
Loading...
