Fisher & Paykel OS24N - Cabinetry Dimensions - Wall Mounted (Ie Installed with a F&P Compact Oven)

6 | WARMING DRAWER INSTALLATION GUIDE
A
B
C
D
F
G
H
I
J
K
L
E
A
B
C
D
F
G
H
I
J
K
L
E
5B CABINETRY DIMENSIONS – WALL MOUNTED (ie INSTALLED WITH A F&P COMPACT OVEN)
23 5/8"
(600mm)
*PO
PLAN
SIDE
CABINETRY DIMENSIONS inches (mm)
M
Minimum inside height of cavity
with optional Lower trim kit fitted
without optional Lower trim kit fitted
23 1/4" (590)
22 1/2" (570)
N
Inside width of cavity 22" (560)
O
Minimum inside depth of cavity 22 1/4" (565)
Note: When installed in combination with a companion product the companion product may be placed directly onto the warming drawer. It is not
necessary to place a shelf between the products. A built-in shelf at the base of the cabinetry able to support the weight of both products is required.
* PO – POWER OUTLET. Ensure there is an accessible earthed power outlet within 35 7/16" (900mm) of the centre rear of the product.
Compact oven
Compact oven
Cabinet below
Additional 11/16" (18mm)
Wood Spacer
Warming drawer
Lower trim kit
(optional, supplied separately)
Compact oven
IMPORTANT!
In a wall mounted installation,
there needs to be an
11/16" (18mm) Spacer fixed
underneath the warming
drawer first to raise it to the
required height.
Warming drawer
Warming drawer
N
O
M
M