Fisher & Paykel QuickSmart Series; WashSmart Series - Selecting Wash Options; Advancing the Wash Cycle

12
To select the wash options
WashSmart™ model
1
Select the wash cycle, temperature, water
level and spin speed (refer to page 7).
2
Press the OPTIONS button if you want to
choose ECO, SOAK or QUICK WASH (refer to
pages 14 and 15).
3
Press START/PAUSE.
QuickSmart™ model
1
Select the wash cycle, temperature, water
level and spin speed (refer to page 9).
2
If you wish to save water press the ECO
option button (refer to page 14).
3
Press START/PAUSE.
The wash progress lights
The wash progress lights show all the tasks
your washer will do during the wash cycle.
As each task is completed a light goes out,
so you can tell at a glance how far the cycle
has to go.
To advance the wash cycle
1
Press the button with the ‘two arrows’ repeatedly
to advance the cycle to the desired position.
2
Press START/PAUSE.
Note: each wash progress light equals 3 minutes of
agitation. The ECO option wash progress lights may in
some cases wash for longer. This is dependent on the water
level. The QUICK WASH option shortens the agitation time
for each progress light (WashSmart™ model only).
Clothes care safeguards
To avoid accidentally damaging your clothes there are a few options that your washer will not
accept. For example, you cannot select a HOT wash on the HAND WASH or EASY IRON cycles
(WashSmart™ model) and DELICATE or WOOL cycles (QuickSmart™ model), nor can you select the
ECO option on anything other than the HEAVY DUTY or REGULAR cycles (both models).
Wash options and advancing the cycle
Fig.11 Wash progress lights
Note: while WashSmart™ model is shown, setting of the
QuickSmart™ model is identical
Fig.10 Selecting wash options
WashSmart™
QuickSmart™
WashSmart™
Fig.12 Advancing the wash cycle
QuickSmart™