321037
18
5.4.3 Condenser
The condenser is made of tube and wires welded and folded and is located horizontally in the base
of the cabinet (see circuit diagram below). Air is drawn across and through this condenser by the
condenser fan that is located alongside the compressor in the unit compartment.
It is important that the condenser is cleaned from time to time as any restriction to air flow
will affect the overall operating performance of the cabinet.
Diagram
5.4.3
5.4.4 Condenser Fan
The condenser fan, located in the unit compartment between the compressor and control module,
is of the shaded pole type motor, pulling air through the condenser.
Diagram 5.4.4
To Next Page
Loading...
