25
Using your water dispenser (Ice & Water models only)
Dispensing
Your water dispenser has been designed for one-handed operation.
To dispense water push the dispensing pad gently, using a glass or
container. This pad requires only a gentle press to activate.
To stop the flow of water, simply pull your glass away from the
dispensing pad.
Please remember that pressing very hard against the dispensing pad
will not encourage the dispenser to operate faster or produce greater
quantities of water.
First use
Please make sure you have read and followed page 14 before using your water dispenser.
Important!
To avoid damage to property or personal injury do not put hands, fingers or objects up the
dispenser opening.
Please note that once installation is complete a few drips may appear out of the dispenser over
the next few days as the remaining trapped air is cleared.
Dispenser Lock
The DISPENSER LOCK prevents water from being dispensed. This is useful when you are cleaning
the external display or when there are small children around.
Press and hold the button for 4 seconds to activate DISPENSER LOCK.
The light above the DISPENSER LOCK icon will be illuminated.
Pressing the water dispenser pad will cause a raspberry sound indicating
to the user that water cannot be dispensed.
To de-activate the DISPENSER LOCK, press and hold the button for
4 seconds. The light above the DISPENSER LOCK icon will no longer be
illuminated and water dispensing will be enabled.
Fig.20 Water dispenser
Fig.21 Dispenser Lock
US
CA
To Next Page
Loading...
