Fisher & Paykel RS2474S3RH - Front View

10
PRODUCT AND CAVITY DIMENSIONS
INDICATES CAVITY CLEARANCES
INDICATES PRODUCT DATUM
NOTE: Left hand hinge is a mirrored version of the image shown.
Left hand hinge can be achieved using supplied parts.
Product Dimensions
in
mm
a Overall height of product
74
1880
B Overall width of product
2 5/16
592
C Overall depth of product
22 1/16
579
D Minimum cabinetry clearance from side of door panel*
5/2
4
E Minimum cabinetry clearance from top of door panel*
1/8

F Depth of door panel*
5/8–/4
16–19
G Height of toe kick panel*
4
100
H Depth of toe kick (excl. front door and toe kick panels)
2–4
50–100
Cavity Dimensions
in
mm
I Overall height of cavity
74
1880
J Overall width of cavity
2 5/8
600
K Minimum overall depth of cavity:
• When services are located outside of cavity (shallow)
• When services are located in the cabinet above the cavity
• When services are located at rear of cavity (deep)
2 5/8
24
25 9/16
600
610
650
Note: Product shown installed on the floor. Slide into cabinetry position. Alternatively
can be installed on a plinth. Adjust your cavity height accordingly.
For custom panel dimensions refer to page 1
* Custom door panel and toe kick panel to be manufactured and fitted
by cabinetmaker.
Dimensions may vary by ±1/16’’ (2mm)
VERTICAL GAP
CLEARANCE FROM SIDE
OF DOOR PANEL
J
K
D
C
A
J
I
FRONT VIEW
K
PROFILE VIEW
4
DATUM: FRONT OF CHASSIS
G
F
H
FLOOR
E
B
PLAN VIEW
DATUM:
FRONT OF CHASSIS
579
1880
592