21
DEPTH GAUGES & SPACER INSERT HINGE LIMITING PIN (OPTIONAL)
To limit the door opening to 90, lower
the hinge limiting pin into the upper
and lower hinges.
1
Clip both hinge spacers onto
the product.
Ensure spacer
A is fitted to the top of
the product and spacer B is fitted to
the bottom of the product, for right-
hand hinge installations and vice versa
for left-hand hinge installations.
Using the supplied crosshead screws,
fit the depth gauges at the the top &
bottom of the door as shown.
Multiple product installs:
Fit either the depth gauges or spacers
at the top and bottom of the product
based on your installation as shown.
1
2
3
Install kits B & C
Install kit B
Install kit H
To Next Page
Loading...
